BLACK-WHITE – INKY PHAT (EPAPER-EINK-EPD), PIMORONI PIM368

  • Zaloga DA, 3 kos/ov pri dobavitelju
  • Dobava 7 dni
  • Znamka: PIMORONI
  • Id številka: 1829/7
36,48 €

Inky pHAT (ePaper/eInk/EPD)

A low-energy, high-falutin, electronic paper (ePaper / eInk / EPD) display for your Pi.

 

Inky pHAT's beautiful 212x104 pixel, display is ideal for displaying simple graphics and crisply-rendered text and, because it's like paper, it's readable in bright sunlight.

 

Use Inky pHAT as a cute little clock, display tweets on it, the weather, news headlines, sports scores, and more. It's also ideal for graphing data from remote sensors, CPU load or temperature, or stock prices.

 

Note that Inky pHAT uses a new display now (as of early December 2017), and requires updated software. The new software automagically detects the display version, so should work interchangeably with the old and new displays.

 

Also note that a change to the Python library to support the new colours of display means that you'll need to put inkyphat.set_colour("red") just below the import inkyphat at the top of your code. Replace "red" with "yellow" or "black" depending on the colour of your Inky pHAT.

 

Features

2.13" EPD display (212x104 pixels)

Inky pHAT pinout

Compatible with Raspberry Pi 3B+, 3, 2, B+, A+, Zero, and Zero W

Python library

Comes fully assembled

Multi-colour EPD displays, like the ones on Inky pHAT, use ingenious electrophoresis to pull coloured particles up and down on the display. The coloured particles reflect light, unlike most display types, meaning that they're visible under bright lights. It takes approximately 15 seconds to refresh the display, with a typical 8mA current draw during refreshes. The black/white display can be refreshed much more quickly, in just a second or two.

 

Everything comes fully-assembled, and there's no soldering required! The display is securely stuck down to the Inky pHAT PCB and connected via a ribbon cable. Just pop Inky pHAT on your Pi and run our installer to get everything set up!

 

It'll work with any 40-pin version of the Pi, including Pi Zero and Pi Zero W.

 

Software

Pimoroni Python library takes the stress out of displaying text and images on Inky pHAT, and our examples include a cute clock and weather display. We've put together a one-line-installer for the Python library too, to make installation a little more straightforward.

 

Pimoroni software does not support Raspbian Wheezy.

 

Notes

Overall dimensions: 65x30x8.5mm (WxHxD, depth includes header and display)

Display usable area dimensions: 48.5x23.8mm (WxH), 2.13" diagonal

 

 

Specifikacije

Glavno

Processor
Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz
Memory
512MB LPDDR2 SDRAM
Connectivity
2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
Access
Extended 40-pin GPIO header
Video & sound:
1 × full size HDMI

Dimenzije

Dolžina
99 mm
Širina
207 mm
Višina
208 mm
Opozorilo! Vsebina lahko vsebuje napake.