Artikla trenutno ni na zalogi. Spodaj se lahko prijavite in poslali vam bomo obvestilo, takoj ko artikel prispe na zalogo. Obvestilo boste dobili samo za ta artikel.
Za željeni artikel nam pošljite sporočilo/povpraševanje in vas bomo kontaktirali.
Za željeni artikel nam pošljite sporočilo/povpraševanje in vas bomo kontaktirali.
Industrial USB to RS485 bidirectional converter with original FT232RL and SP485EEN chip. Due to its stable communication, it is an ideal choice for industrial control equipments and/or applications with high communication requirement.
PRODUCT TYPE | Industrial Grade USB to RS485 converter | |
---|---|---|
HOST PORT | USB | |
DEVICE PORT | RS485 | |
BAUDRATE | 300bps ~ 921600bps | |
USB | Operating voltage | 5V |
Connector | USB-A | |
Protection | 200mA self-recovery fuse, ESD protection | |
Transmission distance | About 5m | |
RS485 | Connector | Screw terminal |
Pins | A+, B-, GND | |
Direction control | Hardware automatic control | |
Protection | 600W lightningproof and surge-suppress, 15KV ESD protection (onboard 120R balancing resistor) | |
Transmission distance | About 1.2km(low rate) | |
Transmission mode | Point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more) | |
LED INDICATORS | PWR | Red power indicator, light up when there is USB connection and voltage is detected |
TXD | Red TX indicator, light up when the USB port sends data | |
RXD | Red RX indicator, light up when the device ports send data back | |
OPERATING ENVIRONMENT | Temperature | -15℃ ~ 70℃ |
Humidity | 5%RH ~ 95%RH | |
OPERATING SYSTEM | Mac, Linux, Android, WinCE, Windows 10 / 8.1 / 8 / 7 / XP |
Onboard Original FT232RL And SP485EEN Chips, Providing Better Stability And Compatibility, Built-In Lightningproof Tube, Resettable Fuse, ESD And TVS Protection Circuits, Etc.
The USB Signal Can Be Converted Into A Balanced Differential RS485 Signal And The Transmission Rate Is Stable. The Reliable Speed Is 300-921600bps, The Transmission Distance Is About 1.2km For RS485, And About 5 Meters For USB.
Supports Mac, Linux, Android, WinCE, Win11/10/8.1/8/7/XP, Etc.
Onboard 3 LEDs For Indicating The Power And Transceiver Status