Product details 1Sheeld+ for using iPhone and Android with Arduino The 1Sheeld+ is an easily configured shield for Arduino. It has a built-in bluetooth low energy module that gives to your Arduino the capability to connect itself to your iOS and Andr...

This is a 3x2-pin header male strip with 2,5 mm pitch. It can be used for making custom shields or any project that you want!    ...

The Analog 180° Micro Servo module is a high quality micro servo with the standard TinkerKit 3pin connector to be plugged in the Sensor Shield. The best choice to add Robotics & Mechatronics to your project. Servos ar...

The Arduino Micro is a microcontroller board based on the ATmega32u4, developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro US...

The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog...

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, ...

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.0). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and work...

The Arduino Uno R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a res...

The Arduino Leonardo is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP h...

The Arduino 4 Relays Shield is a solution for driving high power loads that cannot be controlled by Arduino"s digital IOs, due to the current and voltage limits of the controller. The Shield features four relays, each relay provides 2 pole change...

Arduino 9 Axes Motion Shield   The Arduino 9 Axes Motion Shield has been developed with Bosch using their BN0055 absolute orientation sensor as an on-board key feature. With the shield, designers can start to introduce motion sensing to projects...

Tailored for students ages 13 to 17, CTC 101 is the ideal professional development program for educators. CTC 101 has been certified by the Finnish Kokoa Education Standard™ that guarantees high educational value and robust pedagogical design ...

Creative Technologies in the Classroom 101, or CTC 101, is a 5 modules STEAM program, tailored for students ages 13 to 17. It is the flagship Arduino Educational Program for schools. CTC 101 uses “project-based” learning methodology. Stu...

CTC GO! - Core Module is a getting started program including eight lessons, eight guided projects, and six self-guided projects that teach students how to use electronics and gives them an introduction to programming and coding. The lessons increase ...

Product Details   The Arduino Due board features a 32-bit SAM3X8E ARM Cortex-M3 microcontroller and comes in two versions: 7697412 with headers and 8474888 without headers. To power up your Due board and get started, you can either connect it to...

Description The Arduino Engineering Kit Rev2 is an all-encompassing, practical educational toolkit that equips students with a solid grasp of fundamental engineering principles, essential mechatronics skills, and programming in MATLAB and Simulink, a...

The Arduino Engineering Kit includes three cutting-edge Arduino-based projects so that students can learn fundamental engineering concepts, key aspects of mechatronics, and MATLAB and Simulink programming. These projects will challenge them intellect...

The Arduino Ethernet Shield 2 connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino Board, connect it to your network with an RJ45 cable (not included) and follow a few simple steps to start controlling your w...

The Arduino Fundamentals exam + kit bundle includes an Arduino Starter Kit and access to the certification exam. Developed in consultation with interaction designers and electronic engineering professionals as well as in regards to leading technology...

Description The Arduino GIGA R1 WiFi is designed for ambitious makers who want to step up their game. It levels the playing field for gamers, artists, sound designers and anyone coming to the tech world with big ideas on a budget – because it p...

  Product Details   Arduino Leonardo Development Boards (with and without headers) Arduino have two versions of the Leonardo board from Arduino; 761-7324 with headers and 761-7315 without headers. The Leonardo features an on-board ATmega32u...

Description The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB ...

Product Details   Arduino Micro Development Board The Arduino Micro is a tiny 48 x 18 mm development board with a built-in USB connection — great for prototyping. There are two versions of the Micro board, 7798864 without headers and 77176...

The MKR 485 shield is the ultimate expansion that allows MKR boards to connect to almost any legacy industrial system, such as industrial PLCs, controllers, drives and HMIs. Old industrial systems (e.g., machinery, heating systems, and conveyors) can...

The MKR CAN shield can simplify the connection of the MKR boards with industrial systems and especially with automotive applications. This shield opens a new set of possible applications like smart vehicles, autonomous cars and drones. A CAN connecti...

The MKR CONNECTOR CARRIER shield is an essential tool for rapidly prototyping activity. It allows you to connect easily and quickly sensors with Grove connectors. This shield can allow you to build applications with different IoT connectivities by si...

You may want to connect an Arduino MKR board with an Ethernet cable instead of using WiFi. An Ethernet connection can sometimes be stabler, faster, and more secure. To do this, plug in the Arduino MKR ETH shield. Are you developing a project for an e...

The MKR IoT Bundle walks you through the basics of using the Arduino MKR1000 for IoT applications. You"ll learn through building 5 creative experiments thanks to the step by step online tutorials available on the Arduino Project Hub platform. The...

The Arduino MKR MEM shield will allow you to add more flash memory and storage. It provides 2-megabytes of flash memory. It also includes a slot for adding a microSD card to store several gigabytes of storage. This can allow you to store data for lat...

The board"s main processor is a low power Arm® Cortex®-M0 32-bit SAMD21, like in the other boards within the Arduino MKR family. The Narrowband connectivity is performed with a module from u-blox, the SARA-R410M-02B, a low power chipset o...

The MKR Relay Protoshield allows you to easily add relays to your MKR board based project. The shield provides two relays (Datasheet) - RELAY1 and RELAY2 commanded by pin 1 and pin 2 respectively. The shield also provides an easy connection by means ...

The Arduino MKR Vidor 4000 brings Arduino"s ease of use to the work with the most powerful reprogrammable chips that exist: FPGAs. With Vidor you can create a board where all pins are PWM signals controlling the speed of motors. You can capture ...

 The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a BLE device sendi...

The MKR ZERO brings you the power of a Zero in the smaller format established by the MKR form factor. The MKR ZERO board acts as a great educational tool for learning about 32-bit application development. It has an on-board SD connector with dedicate...

Arduino MKR1000 has been designed to offer a practical and cost effective solution for makers seeking to add Wi-Fi connectivity to their projects with minimal previous experience in networking.It is based on the Atmel ATSAMW25 SoC (System on Chip), t...

The Arduino Motor Shield is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board, controlling the speed and ...

The Nano 33 BLE (without headers) is Arduino’s 3.3V compatible board in the smallest available form factor. It comes with an embedded 9 axis inertial sensor what makes this board ideal for wearable devices, but also for a large range of sc...

The board"s main processor is a low power Arm® Cortex®-M0 32-bit SAMD21. The WiFi and Bluetooth® connectivity is performed with a module from u-blox, the NINA-W10, a low power chipset operating in the 2.4GHz range. On top of those, se...

Description Meet the Nano ESP32, a significant enhancement to the Arduino lineup that integrates the widely acclaimed ESP32-S3 with Arduino and MicroPython coding environments. Ideal for novices venturing into IoT or MicroPython, as well as seasoned ...

Description Meet the Nano ESP32, an exciting enhancement to the Arduino family, integrating the acclaimed ESP32-S3 into Arduino and MicroPython development environments. Ideal for anyone from novices embarking on their journey in IoT or MicroPython t...

The Nano Every is Arduino’s 5V compatible board in the smallest available form factor. The Arduino Nano Every is an evolution of the traditional Arduino Nano board, but features a lot more powerful processor, the ATMega4809. This will allow you...

Overview The Portenta H7 Lite is a cost-effective solution, designed for complex environments where radio communication is not suitable or possible. It is perfect for developers who want to leverage the computational power of the Portenta H7, without...

  Product Details   Arduino Proto Shield Extension Kits Two Proto Shield Extension Kits from Arduino: (6961677) Extension Kit and (7717676) Extension Kit specifically for the Arduino Mega. Both kits provide you with a proto shield and other...

Description Explore the thrilling world of physics in a way you"ve never experienced before with the Arduino Science Kit R3. Packed to the brim with engaging features, this kit transforms learning into an adventure far beyond the conventional cla...

This Classroom 6-Pack is for a classroom of at least twelve students — the recommended ratio is two students per kit — and intended for use starting from middle school teachers onwards, looking for an extensive educational solution for le...

This kit walks you through the basics in a hands-on way, with creative projects you build by learning, thanks to a selection of the most common and useful electronic components with a selection of 15 projects that start from a low complexity, in orde...

Description The world"s favorite development board has gone mini. Everything in this version of the Arduino UNO is unique. Black and gold, finishing, elegant design and packaging, all delivered to the highest standard. A little jewel to celebrate...

Description Upgraded and refined, the Arduino UNO R4 Minima boasts a potent 32-bit microcontroller from Renesas, ushering in a new era of enhanced processing capabilities, larger memory, and a richer set of on-board features. Importantly, it retains ...

Description The Arduino UNO R4 WiFi merges the RA4M1 microcontroller"s processing capabilities and new features from Renesas with the ESP32-S3"s wireless connectivity from Espressif. Additionally, the UNO R4 WiFi is equipped with an onboard 1...

  Product Details   Arduino Uno Development Boards 3 versions of the Arduino Uno Development Board;   The Uno board is used to develop the AVR ATmega 328 microcontroller and can be powered by either connecting the board to a computer v...

Add this board to a device and you"ll be able to connect it to a WiFi network, using its secure ECC608 crypto chip accelerator. The Arduino Uno WiFi is functionally the same as the Arduino Uno Rev3, but with the addition of WiFi / Bluetooth and s...

  Product Details   Arduino Wireless Shields These two shields from Arduino provide your Arduino board with wireless communication. 7485348 has an SD card socket onboard and 7485442 does not have an SD card socket onboard.   Features &...

The Digital Continuous Rotation(360°)Servo Module is a high quality servo with the standard TinkerKit 3pin connector to be plugged in the Sensor Shield (remember that the Signal pin is ALWAYS the center pin). The best choice t...

Technical specifications: Model: 10DOF Compass: HMC5883L Air pressure sensor: BMP180 Accelerometer: MPU-6050 Standard I2C communication protocol Voltage 3-5V 16-bit AD converter, Gyroscope dynamics : +250500 1000 2000°/s acceleration sensor (acc...

The MKR Proto Shield is a prototyping shield designed for your MKR board. This shield easily plugs onto your MKR using its provided female/male headers, and offers a duplicate breakout for each pin on the board along with many solderable through-hole...

The MKR2UNO Adapter allows you to turn your Arduino UNO form factor based project into a MKR based one without too much effort! You can so upgrade your project with a powerful board with integrated LiPo battery charger. Tehnical specification Oper...

Description The Nicla Sense ME is a tiny, low-power tool that sets a new standard for intelligent sensing solutions. With the simplicity of integration and scalability of the Arduino ecosystem, the board combines four state-of-the-art sensors from Bo...

Description The Portenta H7 Lite Connected is designed to provide the computational power of the Portenta H7 for AI applications and low-latency control solutions, with a module that is made more cost-effective by removing the high-resolution video i...

  Product Details   Arduino Proto Shields (assembled, unassembled and Mega) There are three proto shields: assembled (7589345), unassembled (6961673) and (7697399) specifically for the Arduino Mega. All of the shields are ideal for your cus...

The ProtoShield makes it easy for you to design custom circuits. You can easily solder TH or SMD ICs on the prototyping area to test them with your Arduino board. The SMD area is designed for a maximum of 24 pins SOIC integrated circuit and the TH ar...

  Product Details   This accessory kit provides two wheels, two motors, two spheres and eight screws — all to fix motor powered wheels to your Arduino Robot.   Specifications   Classification; Wheel Set Name; Arduino Robot T...

The Sensor Shield v.2 allows you to hook up the TinkerKit SENSORSand ACTUATORS directly to the Arduino, without the use of the breadboard. It has 12 standard TinkeKit 3pin connectors. The 6 labeled I0 through I...

The Basic Kit is a pack of different TinkerKit Modules, aimed to start designing interactive environments / prototype interfaces without using the breadboard or the soldering iron. The Basic Kit consists in the Sensor Shield V.2, 7 different Sensors,...

    Product details   The TinkerKit Braccio is a fully operational robotic arm, controlled using an Arduino Board. Designed for desktop use and is supplied in kit form so you can assemble it to your own requirements.   It can be u...

  Product Details   TinkerKit Cables Arduino have a variety of TinkerKit cables that are essential for connecting TinkerKit modules to the TinkerKit sensor shield (7485401). Featuring a 3-pin jumper at both ends, the cables are available in...

A gyroscope is a device that measures orientation. It is very common in consumer electronics such as portable electronic devices and video game controllers to detect movement and rotation. Output: This module outputs 0V to 5V on one of its ...

  Product Details   TinkerKit LDR Module The TinkerKit Module from Arduino adds a light dependent resistor (LDR) to your Arduino design using the TinkerKit Sensor Shield as an interface. The more light the resistor gets the weaker the resis...

The Thermistor is a resistor whose resistance varies significantly (more than in standard resistors) with temperature. Output: This module"s output approches 5v as the temperature increases. As the temperature decreases, it approaches 0V. When co...

The Wireless SD shield allows an Arduino board to communicate wirelessly using a wireless module. It is based on the Xbee modules from Digi, but can use any module with the same footprint. The module can communicate up to 100 feet indoors or 300 feet...