Artikla trenutno ni na zalogi. Spodaj se lahko prijavite in poslali vam bomo obvestilo, takoj ko artikel prispe na zalogo. Obvestilo boste dobili samo za ta artikel.
Za željeni artikel nam pošljite sporočilo/povpraševanje in vas bomo kontaktirali.
Za željeni artikel nam pošljite sporočilo/povpraševanje in vas bomo kontaktirali.
SHIFT REGISTER, 8BIT, 74HC595, DIP16
Shift Register Function: Serial to Parallel
Logic Type: Shift Register
No. of Elements: 1
IC Output Type: Tri State
Logic Case Style: DIP
No. of Pins: 16
Supply Voltage Min: 2V
Supply Voltage Max: 6V
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
Packaging: Each
Base Number: 74
IC Generic Number: 74HC595
Logic Function Number: 74595
Logic IC Base Number: 74595
Logic IC Family: HC
Logic IC Function: 8bit Shift Register (3-State)
MSL: -
Operating Temperature Range: -40°C to +85°C
Output Current Max: 7.8mA
SVHC: No SVHC (16-Dec-2013)
Supply Voltage Range: 2V to 6V
8 Bit Shift Register with 3 State Output Register in a 16 Pin PDIP Package
The SN74HC595N device contain an 8 bit serial in, parallel out shift register that feeds an 8 bit D type storage register. The storage register has parallel 3 state outputs. Separate clocks are provided for both the shift and storage register. The shift register has a direct overriding clear (SRCLR) input, serial (SER) input, and serial outputs for cascading. When the output-enable (OE) input is high, the outputs are in the high-impedance state. Both the shift register clock (SRCLK) and storage register clock (RCLK) are positive-edge triggered. If both clocks are connected together, the shift register always is one clock pulse ahead of the storage register.
8 bit serial-in, parallel-out shift
Wide operating voltage range of 2V to 6V
High current 3 state outputs can drive up To 15 LSTTL loads
Low power consumption: 80?A max.
±6-mA output drive at 5V
Low input current: 1?A max.
Shift register has direct clear
Clock & Timing
Consumer Electronics
Embedded Design & Development