Obvesti me
Artikla trenutno ni na zalogi. Spodaj se lahko prijavite in poslali vam bomo obvestilo, takoj ko artikel prispe na zalogo. Obvestilo boste dobili samo za ta artikel.
Vaš email naslov:
  CAPTCHA Image
Varnostna koda:

Iskanje
Slovenski
Slovenski
Hrvatski
English
Deutsch
Italiano
Srpski
Prijava Registracija
NOVI ARTIKLI
AKCIJE
NAJBOLJ PRODAJANI
Stroški dostave
Izberi državo
Austria
Belgium
Bosnia and Herzegovina
Bulgaria
Canada
Croatia
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Latvia
Lithuania
Luxembourg
Malta
Montenegro
Netherlands
Poland
Portugal
Romania
Serbia
Slovakia
Slovenia
Spain
Sweden
United Kingdom
Pošta Slovenije 3.00 EUR
 
Informacije
Pogoji in informacije
Vprašajte nas
Galago elektronika
Galago d.o.o.
Trg svobode 20
2390 Ravne na Koroškem
Slovenija
E-pošta: info@galago.si
Telefon: 00386 (0)2 620 08 14
Telefon: 00386 (0)40 559 432
Facebook

WHITE LED BACKLIGHT MODULE - MEDIUM 23MM X 75MM, ADAFRUIT, 1622

  Id številka: 1344
Znamka:ADAFRUIT
Zaloga:   DA
Cena:3,36 €
LEDs ADAFRUIT White LED Backlight Module - Medium 23mm x 75mm, Adafruit, 1622
LEDs ADAFRUIT White LED Backlight Module - Medium 23mm x 75mm, Adafruit, 1622
LEDs ADAFRUIT White LED Backlight Module - Medium 23mm x 75mm, Adafruit, 1622
LEDs ADAFRUIT White LED Backlight Module - Medium 23mm x 75mm, Adafruit, 1622
 

 

Product details

 

These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white light from below. Here, we've got the LEDs available individually and they're really cool! Each LED is encased in a 3.5mm thick strip of a acrylic. The acrylic strip is a special type that is very good at diffusing light, so even though there is only one single white LED, it provides near-uniform lighting. The other flat side of the strip has a reflector on it so you only get light from the top (otherwise the backlight would lose 1/2 the brightness unnecessarily)

 

You can treat this backlight just like an LED, light with ~3V at 20mA current and you get a pretty shape that you can mask with vinyl or draw over with marker. Gels can be used to change the color. We think these would make great wearables without the need for EL or inverters, they're much brighter than EL and use less battery. The trade-off is these are not flexible at all.

 

This particular backlight has a 0.8" by 3" (23mm x 75mm) lit area

 

 

Specifications

 

- Datasheet

- Dimensions: 107.5mm x 22.6mm x 2.7mm / 4.2in x 0.8in x 0.1in

- Weight: 5.6g