Obvesti me
Artikla trenutno ni na zalogi. Spodaj se lahko prijavite in poslali vam bomo obvestilo, takoj ko artikel prispe na zalogo. Obvestilo boste dobili samo za ta artikel.
Vaš email naslov:
  CAPTCHA Image
Varnostna koda:

Iskanje
Slovenski
Slovenski
Hrvatski
English
Deutsch
Italiano
Srpski
Prijava Registracija
NOVI ARTIKLI
AKCIJE
NAJBOLJ PRODAJANI
Stroški dostave
Izberi državo
Austria
Belgium
Bosnia and Herzegovina
Bulgaria
Canada
Croatia
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Latvia
Lithuania
Luxembourg
Malta
Netherlands
Poland
Portugal
Romania
Serbia
Slovakia
Slovenia
Spain
Sweden
United Kingdom
Pošta Slovenije 3.00 EUR
 
Informacije
Pogoji in informacije
Vprašajte nas
Galago elektronika
Galago d.o.o.
Trg svobode 20
2390 Ravne na Koroškem
Slovenija
E-pošta: info@galago.si
Telefon: 00386 (0)2 620 08 14
Telefon: 00386 (0)40 559 432
Facebook

ARDUINO PRO MINI 328 - 3.3V-8MHZ, SPARKFUN, DEV-11114

  Id številka: 1424
Znamka:SPARKFUN
Zaloga:   DA
Cena:12,75 €
primarne plošče SPARKFUN Arduino Pro Mini 328 - 3.3V-8MHz, Sparkfun, DEv-11114
primarne plošče SPARKFUN Arduino Pro Mini 328 - 3.3V-8MHz, Sparkfun, DEv-11114
primarne plošče SPARKFUN Arduino Pro Mini 328 - 3.3V-8MHz, Sparkfun, DEv-11114
primarne plošče SPARKFUN Arduino Pro Mini 328 - 3.3V-8MHz, Sparkfun, DEv-11114
primarne plošče SPARKFUN Arduino Pro Mini 328 - 3.3V-8MHz, Sparkfun, DEv-11114
primarne plošče SPARKFUN Arduino Pro Mini 328 - 3.3V-8MHz, Sparkfun, DEv-11114
 

 

 

Product details

 

This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.

 

This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you’re supplying unregulated power to the board, be sure to connect to the “RAW” pin on not VCC.

 

Dimensions: 0.7x1.3" (18x33mm)

 

Features:

 

- ATmega328 running at 8MHz with external resonator (0.5% tolerance)

- Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers,   sensors, etc)

- 0.8mm Thin PCB

- USB connection off board

- Weighs less than 2 grams!

- Supports auto-reset

- 3.3V regulator

- Max 150mA output

- Over current protected

- DC input 3.3V up to 12V

- On board Power and Status LEDs

- Analog Pins: 8

- Digital I/Os: 14

 

Documents:

 

- Schematic

- Eagle Files

- Getting Started Tutorial

- Graphical Datasheet

- GitHub