Obvesti me
Artikla trenutno ni na zalogi. Spodaj se lahko prijavite in poslali vam bomo obvestilo, takoj ko artikel prispe na zalogo. Obvestilo boste dobili samo za ta artikel.
Vaš email naslov:

Iskanje
Slovenski
Slovenski
Hrvatski
English
Deutsch
Italiano
Srpski
Prijava Registracija
NOVI ARTIKLI
AKCIJE
NAJBOLJ PRODAJANI
Stroški dostave
Izberi državo
Austria
Belgium
Bosnia and Herzegovina
Bulgaria
Canada
Croatia
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Latvia
Lithuania
Luxembourg
Macedonia, the former Yugoslav Republic of
Malta
Montenegro
Netherlands
Poland
Portugal
Romania
Serbia
Slovakia
Slovenia
Spain
Sweden
United Kingdom
Pošta Slovenije 3.00 EUR
 
Informacije
Pogoji in informacije
Vprašajte nas
Galago elektronika
Galago d.o.o.
Gačnikova pot 2
2390 Ravne na Koroškem
Slovenija
E-pošta: info@galago.si
Telefon: 00386 (0)8 205 08 77
Telefon: 00386 (0)40 559 432
Facebook

PROPELLER ELEV-8 ROBOT QUADCOPTER KIT V2, PARALLAX INC, 80200

Znamka:
PARALLAX INC
IZDELEK SMO ODSTRANILI IZ NAŠE PONUDBE!
DRONI PARALLAX INC Propeller Elev-8 robot quadcopter kit V2, Parallax Inc, 80200
DRONI PARALLAX INC Propeller Elev-8 robot quadcopter kit V2, Parallax Inc, 80200
 

 

 

 

Product details

 

The ELEV-8 quadcopter is a flying robotic platform propelled by four fixed rotors. Unlike standard helicopters, a quadcopter uses fixed-pitch blades, whose rotor pitch does not vary as the blades rotate: control of vehicle motion is achieved by varying the relative speed of each rotor to change the thrust and torque produced by each.

ELEV-8 uses a HoverFly electronic control board with a Propeller multicore microprocessor to provide stable flight. This system yields a stable platform with no mechanical linkages for a small maneuverable and agile aircraft.

The kit includes all necessary parts apart from R/C radio equipment & a battery. A six channel R/C system is recommended.

The ELEV-8 platform is large enough for outdoor flight and has plenty of room for payload and attachments.

 

 

ELEV-8 Quadcopter Version 2

 

- Open under body for camera mounting

- Easily customised

- Protected electronics

- Modular frame for fast repair

- Protective motor mounts

- Can fly with added payloads up to 1 lb (450 g) in weight

- Weight: 2.5 lbs (1130 g) fully assembled (without battery)

- Size: 654 mm, motor axis diameter

- 2 x 1045C clockwise composite propellers

- 2 x 1045CR anti clockwise composite propellers

- 4 x 30A Electronic Speed Controllers

- 4 x Keda KA20-20L BLDC outrunner 1050 kV motors

- HoverflyOPEN Flight Controller with Invensense ITG-3200 gyroscopic sensor, powered by a Parallax Propeller 1 - microcontroller

- Open Source: design files available online

 

 

Note

 

This kit is NOT for beginners, it takes a moderate amount of mechanical skill, for building and flying. The ELEV-8 quadcopter kit requires an average of 8 hours to assemble. R/C experience is highly recommended. A radio control transmitter, receiver, lithium-polymer battery and charger are required for flight and are NOT included in the Kit.

The Crash Pack kit (80080) contains the most commonly damaged parts.

 

 

Supplied with

 

- Hardware pack, wiring harness, safety glasses

 

 

 Propeller™ Microcontrollers & Robots

The Propeller™ 1 microprocessor chip makes it easy to rapidly develop embedded applications. Its eight 32-  bit processors (COGs) can operate simultaneously, either independently or cooperatively, sharing common   resources through a central hub. The developer has full control over how and when each cog is employed;   there is no compiler-driven or operating system-driven splitting of tasks among multiple cogs. A shared   system clock keeps each cog on the same time reference, allowing for true deterministic timing and   synchronization. Two programming languages are available: the easy-to-learn high-level Spin, and Propeller   Assembly which can execute at up to 160 MIPS (20 MIPS per COG).

 

 

Warning

Due to the size of this platform, it can cause serious damage or injury. There is no protection around any of the propellers. We recommend using the RCAPA guidelines for safe use of this aircraft (http://www.rcapa.net/guidelines.aspx).