Artikla trenutno ni na zalogi. Spodaj se lahko prijavite in poslali vam bomo obvestilo, takoj ko artikel prispe na zalogo. Obvestilo boste dobili samo za ta artikel.
Za željeni artikel nam pošljite sporočilo/povpraševanje in vas bomo kontaktirali.
Za željeni artikel nam pošljite sporočilo/povpraševanje in vas bomo kontaktirali.
10BIT ADC, 2.7V, 8CH, SPI, 16DIP
Resolution (Bits): 10bit
Sampling Rate: 200kSPS
Supply Voltage Type: Single
Supply Voltage Min: 2.7V
Supply Voltage Max: 5.5V
ADC / DAC Case Style: DIP
No. of Pins: 16
Input Channel Type: Pseudo Differential, Single Ended
Data Interface: Serial, SPI
Operating Temperature Min: -40°C
Operating Temperature Max: 85°C
Packaging: Each
Base Number: 3008
Conversion Time: 10µs
IC Case Style: DIP
Linearity Error ADC / DAC +: 1LSB
MSL: -
No. of Channels: 8
Operating Temperature Range: -40°C to +85°C
SVHC: No SVHC (16-Dec-2013)
Supply Current: 425µA
Supply Voltage Range: 2.7V to 5.5V
Supply Voltage Range - Analogue: 2.7V to 5.5V
Termination Type: Through Hole
8-Channel 10-Bit Analogue to Digital Converter with a SPI Serial Interface
The MCP3008 device is a successive approximation 10-bit analogue-to-digital converter with on-board sample and hold circuitry. It is programmable to provide four pseudo-differential input pairs or eight single-ended inputs. Differential Nonlinearity (DNL) and Integral Nonlinearity (INL) are specified at ±1 LSB. Communication with the devices is accomplished using a simple serial interface compatible with the SPI protocol.
10-bit resolution
± 1 LSB max DNL
± 1 LSB max INL
Analogue inputs programmable as single-ended or pseudo-differential pairs
On-chip sample and hold
Low power CMOS technology
Sensing & Instrumentation
Signal Processing
Automation & Process Control