Obvesti me
Artikla trenutno ni na zalogi. Spodaj se lahko prijavite in poslali vam bomo obvestilo, takoj ko artikel prispe na zalogo. Obvestilo boste dobili samo za ta artikel.
Vaš email naslov:
  CAPTCHA Image
Varnostna koda:

Iskanje
Slovenski
Slovenski
Hrvatski
English
Deutsch
Italiano
Srpski
Prijava Registracija
NOVI ARTIKLI
AKCIJE
NAJBOLJ PRODAJANI
Stroški dostave
Izberi državo
Austria
Belgium
Bosnia and Herzegovina
Bulgaria
Canada
Croatia
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Latvia
Lithuania
Luxembourg
Malta
Montenegro
Netherlands
Poland
Portugal
Romania
Serbia
Slovakia
Slovenia
Spain
Sweden
United Kingdom
Pošta Slovenije 3.00 EUR
 
Informacije
Pogoji in informacije
Vprašajte nas
Galago elektronika
Galago d.o.o.
Trg svobode 20
2390 Ravne na Koroškem
Slovenija
E-pošta: info@galago.si
Telefon: 00386 (0)2 620 08 14
Telefon: 00386 (0)40 559 432
Facebook

ADAFRUIT MICRO LIPO W-MICROUSB JACK - USB LIION-LIPOLY CHARGER, ADAFRUIT 1904

  Id številka: 376
Znamka:ADAFRUIT
Zaloga:   DA
Cena:7,53 €
liion lipoly ADAFRUIT Adafruit Micro Lipo w-MicroUSB Jack - USB LiIon-LiPoly charger, Adafruit 1904
liion lipoly ADAFRUIT Adafruit Micro Lipo w-MicroUSB Jack - USB LiIon-LiPoly charger, Adafruit 1904
liion lipoly ADAFRUIT Adafruit Micro Lipo w-MicroUSB Jack - USB LiIon-LiPoly charger, Adafruit 1904
 

This little lipo charger is so small and easy to use you can keep it on your desk or mount it easily into any project! Simply plug it via any MicroUSB cable into a USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. There are two LEDs - one red and one green. While charging, the red LED is lit. When the battery is fully charged and ready for use, the green LED turns on. Seriously, it could not get more easy. 

 

Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-voltage trickle charge to keep the battery topped-up. The charge current is 100mA by default, so it will work with any size battery and USB port. If you want you can easily change it over to 500mA mode by soldering closed the jumper on the front, for when you'll only be charging batteries with 500mAh size or larger. 

 

For use with Adafruit LiPoly/LiIon batteries only! Other batteries may have different voltage, chemistry, polarity or pinout.

 

- Comes assembled and tested with a free bonus JST cable!

- 5V input via Micro-B USB connector

- For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells)

- 100mA charge current, adjustable to 500mA by soldering a jumper closed

 

Batteries not included. included (but we have those in the shop as well). 

 

 

Lithium ion polymer (also known as "lipo" or "lipoly") batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 500mAh for a total of about 1.9 Wh.   ...
  Id številka: 378
Znamka:ADAFRUIT
Zaloga:   NE
Dobava:14 dni
Cena:8,61 €
INFO V KOŠARICO
SORODNI ARTIKLI
Adafruit Micro Lipo - USB LiIon-LiPoly charger, Adafruit 1304

Cena: 6,47 €