Obvesti me
Artikla trenutno ni na zalogi. Spodaj se lahko prijavite in poslali vam bomo obvestilo, takoj ko artikel prispe na zalogo. Obvestilo boste dobili samo za ta artikel.
Vaš email naslov:

Iskanje
Slovenski
Slovenski
Hrvatski
English
Deutsch
Italiano
Srpski
Prijava Registracija
NOVI ARTIKLI
AKCIJE
NAJBOLJ PRODAJANI
Stroški dostave
Izberi državo
Austria
Belgium
Bosnia and Herzegovina
Bulgaria
Canada
Croatia
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Latvia
Lithuania
Luxembourg
Malta
Montenegro
Netherlands
Poland
Portugal
Romania
Serbia
Slovakia
Slovenia
Spain
Sweden
United Kingdom
Pošta Slovenije 3.00 EUR
 
Informacije
Pogoji in informacije
Vprašajte nas
Galago elektronika
Galago d.o.o.
Trg svobode 20
2390 Ravne na Koroškem
Slovenija
E-pošta: info@galago.si
Telefon: 00386 (0)2 620 08 14
Telefon: 00386 (0)40 559 432
Facebook

SEEEDUINO STALKER V3, SEED 800162001

  Id številka: 392
Znamka:SEEED STUDIO
Zaloga:   DA, 2 kos/ov
Cena:52,34 €
arduino compatible SEED STUDIO Seeeduino Stalker v3, seed 800162001
arduino compatible SEED STUDIO Seeeduino Stalker v3, seed 800162001
arduino compatible SEED STUDIO Seeeduino Stalker v3, seed 800162001
arduino compatible SEED STUDIO Seeeduino Stalker v3, seed 800162001
 

Seeeduino Stalker v3 is an Arduino compatible main board which has various functions. It's an X-Bee carrier board while using with X-Bee modules, such as GPS Bee, Bluetooth Bee and Wifi Bee, etc. It's a charger for Lipo while plugging a solar panel onto the board. Also, you can get time from the inside RTC chip, and all data can be easily stored through the SD card. In a word, Seeeduino Stalker v3 has an independent ecological system and it's good for applications in outdoor environment. 

 

Features:

- Arduino compatible, based on Seeeduino

- Onboard microcontroller: ATmega328P

- Onboard Real Time Clock chip with a supercap as a backup power source

- Serial interface with DTR for auto reset during programming when operating in standalone mode. (For programming, UartSBee must be bought separately)

- MicroSD card socket

- I2C Pin header (operation voltage is selectable: 5.0V or 3.3V)

- User defined LED

- Bee series socket - 2*10 pin 2.0mm pitch (which will mate with - one at a time - any of the wireless modules: XBee, BluetoothBee, GPSBee or RFBee.)

- Please note that The IO Ports work in 0~3.3v level only.

 

Documents

- wiki 

- forum