Filtri

Zadnje ogledano

RASPBERRY PI RELAY BOARD V1.0 SEEED 103030029

30,44 €

The Relay Shield utilizes four high quality relays and provides NO/NC interfaces that control the load of high current. Which means it could be a nice solution for controlling devices that couldn’t be directly controlled by IIC bus. Standardized shield form factor enables smoothly connection with the Raspberry Pi . The shield also has four dynamic indicators show the on/off state of each relay. 

 

Features:

- Raspberry Pi compatible

- Interface:IIC , Three hardware SW1 (1, 2, 3) select the fixed I2C-bus address

- Relay screw terminals

- Standardized shield shape and design

- LED working status indicators for each relay

- COM, NO (Normally Open), and NC (Normally Closed) relay pins for each relay

- High quality relays

- Working status indicators for each relay

 

Specification:

 

 

Compatible: Raspberry Pi ; Other main board via jumpers;

Power supply: 4.75~5.5V ;

Max Switching Voltage: 30VDC/250VAC;

Max Switching Current: 15A ;

Frequency: 1Hz;

Dimensions: 91.20 * 56.15 * 32mm;

 

Links:

Wiki page

 

Specifikacije

Glavno

Processor
Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz
Memory
512MB LPDDR2 SDRAM
Connectivity
2.4 GHz and 5 GHz IEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
Access
Extended 40-pin GPIO header
Video & sound:
1 × full size HDMI

Dimenzije

Dolžina
99 mm
Širina
207 mm
Višina
208 mm
Opozorilo! Vsebina lahko vsebuje napake.